by Air conditioning a car showroom is a more complex task than it seems at first glance. The showroom, managers’ office, and waiting area have different heat loads, different noise level requirements, and different operating schedules. Specialists from «Kondytsionery Ukrainy» have experience in selecting and installing air conditioning systems for various types of commercial facilities – from offices to large commercial spaces. If you are planning to buy air conditioners in Kyiv, it is important to consider the features of the premises at the equipment selection stage.
Which zones of a car showroom require air conditioning and how they differ
Showroom
The most loaded zone: large area, panoramic glazing, ceiling height of 4–6 m, constant flow of visitors. In summer, the temperature here rises faster than in other rooms. For uniform air distribution without drafts and cold zones in large showrooms, cassette units built into the ceiling or a duct system with concealed ductwork are most often used. In small showrooms, wall-mounted units can also be used – depending on the area and configuration of the room.
Managers’ Office
A standard office space with constant occupancy by people. For a small office, a wall-mounted inverter air conditioner is suitable – simple installation, efficient operation, affordable maintenance. It is important to choose a model with a low noise level of the indoor unit so as not to interfere with negotiations and phone calls.
Waiting Area
Here, clients spend time waiting for paperwork or a technical inspection. Comfortable temperature and quiet system operation are priorities. A wall-mounted or cassette unit with a quiet operation mode handles this task.
Manager’s Office
A small room with an individual work schedule. A wall-mounted air conditioner with minimal noise level and precise temperature maintenance is the optimal solution. Wi-Fi control allows you to set up the system before arrival or turn it off after leaving.
Recommended Type of Unit for Each Zone
| Zone | Unit Type | Why |
| Showroom (large) | Cassette or duct | Uniform air distribution, concealed installation |
| Managers’ Office | Wall-mounted inverter | Simple installation, efficient operation |
| Waiting Area | Wall-mounted or cassette | Quiet operation mode, comfort for clients |
| Manager’s Office | Wall-mounted, minimal noise | Independent control, precise temperature maintenance |
How to correctly select the air conditioner capacity for each zone
For a preliminary assessment, a ratio of about 1 kW of cooling capacity per 10 m² of area is often used, but for commercial spaces this indicator requires mandatory clarification, taking into account ceiling height, glazing area, number of people, and equipment.
For a car showroom, this is especially relevant:
• a showroom with an area of ~200 m², a ceiling height of 5 m, and panoramic glazing – the actual heat load can significantly exceed the basic area-based calculation;
• orientation of the facade to the south or west increases the solar load and requires capacity adjustment;
• in the waiting area, the number of people simultaneously in the room is taken into account – each person adds a heat load.
> From the practice of «Kondytsionery Ukrainy»: on commercial objects with a large glazing area, we recommend including a cooling capacity margin after an engineering calculation. Showrooms with panoramic glazing and orientation to the west or south during peak heat produce a load that the basic area-based calculation systematically underestimates.
– Vasyl Tymkovych, design engineer at «Kondytsionery Ukrainy»
What to pay attention to when choosing an air conditioner for a car showroom
• Noise level – for the waiting area and office, no higher than 25–30 dBA at minimum speed. The parameter is specified in the technical documentation.
• Operating temperature range in heating mode – depending on the model, –15°C or –25°C and below. Relevant for year-round operation.
• Energy efficiency class – with daily multi-hour operation, the difference between A+ and A+++ becomes noticeable in electricity bills.
• Centralized control – for multiple zones, it is convenient to control all units from one location or via an app.
• Warranty – up to 5 years on equipment depending on the brand and model, 12 months on installation work.
Typical mistakes in car showroom air conditioning
• Selecting capacity only by area without an engineering calculation. For a showroom with large glazing, this is almost a guaranteed mistake – the system fails during peak heat, although it is formally selected correctly.
• Installing one powerful unit for the entire showroom instead of evenly distributing several. The result is uneven temperature: cold near the unit, hot in the corners.
• Ignoring noise characteristics. A loud system in the waiting area creates discomfort for clients and reduces the quality of service.
• Choosing equipment without considering aesthetics. A wall-mounted unit in a showroom with a premium interior may look inappropriate – here it is worth considering a cassette or duct option with concealed installation.
Properly selected air conditioning for a car showroom works unobtrusively: it maintains a comfortable temperature in each zone, does not make noise, and does not spoil the appearance of the room.
